Spooky Gummy Bear
A gummy bear with a jack-o'-lantern face carved into it. Printed in soft TPU so it squishes like the sweet, sitting up on its own, and the face is cut into the body rather than printed on it, so it cannot rub off. Made at the size you ask for.
$8.00CAD
Print This One →Fixed price back within a day · A person reads itThe weight and time shown are the 100 mm one. It is hollow at 5% fill, because the hollow is what makes it squish, so almost all of the plastic is shell. A foot-tall one is still fifty hours: five percent of 6.3 litres is a lot of five percent.
The Facts
- Material
- TPU 95A
- Process
- FDM
- Weight
- 48 g
- Print Time
- 4 h
- Colours
- Purple, Orange, Black, Green, Red
Orders start at $18.00. Add a second one, or pair it with anything else, and the minimum stops applying.
Specifications
- Size
- Made to order, 25 mm to 300 mm
- Material
- TPU to squish, or PETG and PLA hard and cheaper
- Face
- Cut into the body, not printed on it
- Fill
- Hollow at 5%. The hollow is what squishes.
- Supports
- None: it sits up on its own
By Size
- 25 mmAn inch. Keychain size.
- $8.00
- 50 mmTwo inches
- $14.00
- 100 mmPalm size
- $26.00
- 150 mmThe good one
- $48.00
- 200 mmEight inches
- $85.00
- 300 mmA foot. Fifty hours on the machine.
- $220.00
The Material
Why it is printed in TPU 95A.
This one is printed in TPU 95A, chosen for the job rather than for what was cheapest on the shelf. The material is named in every quote and we will explain why if you ask.
Choosing the material by price rather than by where the part has to live is the single most common reason a printed part fails in service. It is named on every listing and in every quote for that reason, and if a different material suits your use better we will say so before you pay for the wrong one.
How It Is Made
Printed to order, in New Brunswick.
Nothing here sits on a shelf. Each one is printed when it is ordered, which is why the colour, the size and the material are all still open questions at the point you ask rather than fixed by whatever a warehouse happens to hold.
This one is roughly 4 hours on the machine, so it is usually an overnight job at 48 g of material. There is no tooling cost and no minimum quantity, so a single piece is a normal order. The design is ours, drawn in-house.
Questions
Straight answers.
Can I get the Spooky Gummy Bear in a different colour?
The colours listed are the ones we hold: Purple, Orange, Black, Green, Red. If you want something else, ask. We can usually source a filament for a specific colour, and on a made-to-order part there is no reason not to.
Can you change the size or modify it?
Yes, and that is normal here rather than a special request. Everything is made to order from parametric geometry, so a dimension change is a number, not a redesign. Tell us what has to fit and send a measurement.
How long does it take?
Printing is roughly 4 hours on the machine, so it is usually an overnight job. Add the queue and shipping: most orders leave within two to three business days of you approving the price, and expedited shipping is available when the date is not negotiable.
Do you make things that are not in the shop?
That is most of the work. Broken, discontinued, or never made in the first place. Send a photo of the part or the gap it fills and one rough measurement, and you get a fixed price back within a day, read and answered by a person.
More Like This
Grump Gummy BearTPU 95A · 48g
Lobster SquishTPU 95A · 23g